LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Drive Axle Shaft) >> Front Drive Shaft (Double Offset Joint) Disassembly/Assembly >> Boot (Transaxle Side) Assembly Note

Boot (Transaxle Side) Assembly Note

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The boot shapes on the wheel side and the transaxle side are different. Do not assemble the wrong boot by mistake.
  1. Insert the shaft through the boot (transaxle side) with vinyl tape left wrapped around the spline area of the shaft.
  2. Remove vinyl tape wrapped around the spline area of the shaft.
scientia non olet · About LEMON Manuals