Diagnostic Procedure
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | RECORD CONFIGURATION DATA
|
Go to the next step. | |
| 2 | VERIFY LASER SENSOR DTC
|
Yes | Repeat the inspection from Step1. If the malfunction recurs, go to the next step. |
| No | Go to Step6. | ||
| 3 | VERIFY IF PARTS FROM ANOTHER VEHICLE INSTALLED TO INSTRUMENT CLUSTER OR PCM
|
Yes | Install the correct instrument cluster or PCM, then go to Step1. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .) (See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .) |
| No | Go to the next step. | ||
| 4 | VERIFY INSTRUMENT CLUSTER AND PCM DTC
|
Yes | Go to applicable DTC inspection. (See DTC TABLE [INSTRUMENT CLUSTER] .) (See DTC TABLE [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .) DTC troubleshooting completed, then go to the next step. |
| No | Go to the next step. | ||
| 5 | VERIFY DTC TROUBLESHOOTING COMPLETED
|
Yes | Repeat the inspection from Step1. If the malfunction recurs, replace the laser sensor, then go to the next step. (See LASER SENSOR REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 6 | VERIFY NO DTC IS PRESENT
|
Yes | Go to applicable DTC inspection. (See DTC TABLE [LASER SENSOR] .) |
| No | DTC troubleshooting completed. | ||