DTC B1207-09: Collision Signal Error: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

System malfunction location	Collision signal error
Detection condition	When all of the following conditions continue for 3 s. 1.5 s or more have elapsed after ignition was switched ON RBCM received crash zone sensor error signal from SAS control module
Fail-safe	-
Possible cause	Crash zone sensor malfunction SAS control module malfunction Rear body control module (RBCM) malfunction
System wiring diagram	-