LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (On-Board Diagnostics - A/T) >> DTC P0716-00: Turbine/Input Shaft Speed Sensor Range/Performance Problem >> Notes

DTC P0716-00: Turbine/Input Shaft Speed Sensor Range/Performance Problem: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0716:00 Turbine/input shaft speed sensor range/performance problem
DETECTION CONDITION 
  • Under the following condition, the turbine/input shaft speed is 9, 000 rpm or more  for 1 s  :
    • Battery voltage is 8 V or more  .
FAIL-SAFE FUNCTION 
  • Set to TCC control.
  • Inhibits learning control.
  • Inhibits manual mode.
  • Inhibits neutral idle control.
  • Inhibits AAS.
  • Inhibits 5GR and 6GR.
  • Inhibits shift down when the accelerator pedal is depressed.
POSSIBLE CAUSE 
  • Turbine/input shaft speed sensor malfunction
SYSTEM WIRING DIAGRAM  Not applicable
scientia non olet · About LEMON Manuals