LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (On-Board Diagnostics - A/T) >> DTC P0715-00: Turbine/Input Shaft Speed Sensor/Sensor Output Range Malfunction >> Notes

DTC P0715-00: Turbine/Input Shaft Speed Sensor/Sensor Output Range Malfunction: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0715:00 Turbine/input shaft speed sensor/sensor output range malfunction
DETECTION CONDITION 
  • Under the following conditions, the difference between engine speed signal and turbine/input shaft speed signal is 400 rpm or more  for 1 s  :
    • Engine is running.
    • Turbine/input shaft speed sensor is 9, 000 rpm or less  .
    • The gear shift position is in the neutral condition.
FAIL-SAFE FUNCTION 
  • Set to TCC control.
  • Inhibits learning control.
  • Inhibits manual mode.
  • Inhibits neutral idle control.
  • Inhibits AAS.
  • Inhibits 5GR and 6GR.
  • Inhibits shift down when the accelerator pedal is depressed.
POSSIBLE CAUSE 
  • Turbine/input shaft speed sensor malfunction
SYSTEM WIRING DIAGRAM  Not applicable
scientia non olet · About LEMON Manuals