Bluetooth® PAIRING NOT POSSIBLE [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]]: Notes
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
| Description |
Bluetooth® PAIRING NOT POSSIBLE |
Bluetooth® enabled device cannot be paired to connectivity master unit (CMU)
NOTE:
- The Bluetooth® pairing procedure differs depending on the version of the Bluetooth®-enabled device. Ask the customer in advance what the Bluetooth®-enabled device's version was when the Bluetooth® pairing was performed.
- A maximum of seven Bluetooth®-enabled devices can be programmed to one vehicle.
- If the Bluetooth®-enabled device has an access limitation, the pairing setting cannot be performed. Ask the customer in advance if the Bluetooth®-enabled device has an access limitation.
|
| Possible Causes |
- Customer's Bluetooth®-enabled device malfunction
- Incompatible Bluetooth®-enabled device is used
- Bluetooth® setting is off
- Radio wave transmission setting including Bluetooth® radio wave is off
- If the Bluetooth® pairing has been previously performed, it will be necessary to clear the vehicle data stored in the Bluetooth®-enabled device and re-program.
- Bluetooth®-enabled device internal malfunction
- Connector poor contact or terminal damage
- Connectivity master unit (CMU) malfunction
|