LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (On-Board Diagnostics - Auto A/C) >> Clearing DTC [Full-Auto Air Conditioner] >> ODDTC Clearing DTC Procedure

ODDTC Clearing DTC Procedure

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS(IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "EATC".
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Switch the ignition to off.
  6. Switch the ignition to ON (engine off or on) and wait for 5 s or more. 
  7. Perform DTC inspection. (See DTC DISPLAY [FULL-AUTO AIR CONDITIONER] .)
  8. Verify that no DTCs are displayed.
scientia non olet · About LEMON Manuals