LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Control System (Service Information)) >> Engine Oil Data Reset >> Engine oil data reset procedure

Engine oil data reset procedure

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
Step Inspection Results Action Note
1
  • Using the M-MDS, verify the engine oil maintenance monitor function ON/OFF condition.
  • Is the engine oil maintenance monitor function on?
 Yes Go to the next step. If the engine oil maintenance monitor function is on, it is necessary to perform the engine oil data reset.
No The engine oil data reset is unnecessary.
2
  • Switch the ignition ON (engine off or on) and perform the following procedure within 10 s. 
    • Press the tripmeter switch for 5 s or more  .
  • Does the master warning light flash for 3 s  ?
 Yes Engine oil data reset is completed. The master warning light flashes for 3 s  when the engine oil data reset procedure is completed.
No Perform Step 2 again.
scientia non olet · About LEMON Manuals