Repeatability Verification Procedure

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Warm up the engine to allow the engine coolant temperature to reach 80 °C {176 °F} or more.
Start the engine and leave it idling for 1 min.
Shift to 2nd gear and drive the vehicle for 1 min at a speed of 50 km/h {31 mph} or more.
NOTE:
- Match the engine coolant temperature in the recorded FREEZE FRAME DATA (Mode 2)/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.
Try to reproduce the malfunction by driving the vehicle for 5 min based on the values in the FREEZE FRAME DATA (Mode 2)/snapshot data.