LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (On-Board Diagnostic - Engine Controls (3 Of 4)) >> DTC P2183-00: ECT Sensor No. 2 Circuit Range/Performance Problem >> PID Item/Simulation Item Used In Diagnosis >> PID/DATA monitor item table

PID/DATA monitor item table

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
Item Definition Unit Condition/Specification
ECT2_V ECT sensor No. 2 voltage V
  • ECT is 20 °C {68 °F}: Approx. 3.10 V
  • ECT is 40 °C {104 °F}: Approx. 2.16 V
  • ECT is 60 °C {140 °F}: Approx. 1.40 V
  • ECT is 80 °C {176 °F}: Approx. 0.87 V
  • ECT is 100 °C {212 °F}: Approx. 0.54 V
IAT Intake air temperature (No. 1) °C, ° F
  • Displays IAT (No. 1)
IAT sensor No. 1 voltage V
  • IAT is 20 °C {68 °F}: Approx. 2.70 V
  • IAT is 40 °C {104 °F}: Approx. 1.80 V
  • IAT is 60 °C {140 °F}: Approx. 1.20 V
scientia non olet · About LEMON Manuals