LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (On-Board Diagnostic - Engine Controls (3 Of 4)) >> DTC P2096-00: P2097-00: Ho2S Fuel Injection Control System >> PID Item/Simulation Item Used In Diagnosis >> PID/DATA monitor item table-: Not applicable

PID/DATA monitor item table-: Not applicable

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
Item Definition Unit Condition/Specification
EQ_RAT11 Actual lambda signal -
  • Idle (after warm up): Approx. 1
O2S11 A/F sensor input signal μA
  • Idle (after warm up): Approx. -39 μA
  • Deceleration fuel cut (accelerator pedal released from engine speed of 4, 000 rpm or more): Approx. 3.84 mA
O2S12 HO2S input signal V
  • Idle (after warm up): 0-1.0 V
  • Deceleration fuel cut (accelerator pedal released from engine speed of 4, 000 rpm or more): Approx. 0 V
scientia non olet · About LEMON Manuals