Repeatability Verification Procedure

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Drive the vehicle at a speed of 40 km/h {25 mph} or more.
Shift to 3rd gear and rapidly accelerate the vehicle to 60 km/h {37 mph} (to execute misfire monitor).
Release the accelerator pedal and decelerate the vehicle to 40 km/h {25 mph}.
Repeat Step 1 to 3 operations above 5 times .

NOTE:

Match the engine coolant temperature in the recorded FREEZE FRAME DATA (Mode 2)/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.

Try to reproduce the malfunction by driving the vehicle for 5 min based on the values in the FREEZE FRAME DATA (Mode 2)/snapshot data.