Repeatability Verification Procedure

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Warm up the engine to allow the engine coolant temperature to reach 80 °C {176 °F} or more .
Shift to 2nd gear and rapidly accelerate the vehicle to 50 km/h {31 mph} (to operate hydraulic variable valve timing control).
Decelerate to idling.
Shift to 2nd gear and rapidly accelerate the vehicle to 50 km/h {31 mph} again.