LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (On-Board Diagnostic - Engine Controls (1 Of 4)) >> DTC B10A2-00: Vehicle Collision >> Details On DTCs

Details On DTCs

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DESCRIPTION Vehicle collision
DETECTION CONDITION  Determination conditions
  • A collision signal from the SAS control module is received.
Preconditions
  • Not applicable.
Drive cycle
  • 1
Self test type
  • DTC self test
Sensor used
  • PCM
FAIL-SAFE FUNCTION 
  • Stops fuel injection control
  • Stops fuel pump control
  • Stops ignition control
  • Stops engine coolant fan control
VEHICLE STATUS WHEN DTCs ARE OUTPUT 
  • Stops fuel pump operation when ignition is switched ON
  • Delays starter operation during cranking for maximum 1.2 s  .
POSSIBLE CAUSE 
  • Vehicle is involved in collision (collision signal from SAS control module is received)
  • SAS control module malfunction
  • PCM malfunction
scientia non olet · About LEMON Manuals