DTC B0011-11: B0011-12: B0011-13: B0011-19: B0011-1A: Passenger-Side Air Bag Module (Inflator No. 2): Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

System malfunction location	B0011:11: Passenger-side air bag module (inflator No. 2) circuit short to body ground B0011:12: Passenger-side air bag module (inflator No. 2) circuit short to power supply B0011:13: Passenger-side air bag module (inflator No. 2) circuit open circuit or resistance high B0011:19: Short circuit to passenger-side air bag module (inflator No. 2) and other air bag module circuits B0011:1A: Passenger-side air bag module (inflator No. 2) circuit resistance low
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. Abnormal resistance (other than 0.81-6.42 ohms ) detected in the passenger-side air bag module (inflator No. 2) circuit Wiring harness between passenger-side air bag module (inflator No. 2) and SAS control module has malfunction
Fail-safe	-
Possible cause	Passenger-side air bag module (inflator No. 2) connector malfunction Open or short circuit or short to ground or short to power supply in the wiring harness between the passenger-side air bag module (inflator No. 2) and SAS control module Passenger-side air bag module (inflator No. 2) malfunction SAS control module malfunction