Gap Adjustment

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Verify that the gap between the hood and the body is within the specification.

Fig 1: Checking Gap Between Hood And Body
Courtesy of MAZDA MOTORS CORP.

Standard clearance
- a: -1.2-1.2 mm {-0.047-0.047 in}
Turn the stopper rubber to adjust the height of the hood.

Fig 2: Turning Stopper Rubber

Courtesy of MAZDA MOTORS CORP.