DTC C200B-02; C200B-16; C200B-62; C200B-64; C200B-85: Torque Sensor: Notes
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
| DTC C200B:02, C200B:16, C200B:62, C200B:64 |
Torque sensor |
| DETECTION CONDITION |
- C200B:02
- Signal error detected in torque sensor signal
- C200B:16
- Open or short circuit is detected in torque sensor circuit
- C200B:62
- Difference occurs between the torque sensor signal 1 and the torque sensor signal 2 from torque sensor
- C200B:64
- Signal error detected in torque sensor signal
- C200B:85
- Torque sensor signal is out of the specified range
|
| FAIL-SAFE FUNCTION |
- C200B:02/C200B:16/C200B:62/C200:85
- Control disabled
- Power steering malfunction indicator light: Illuminated
- C200B:64
- Control is maintained in the backup control
- Power steering malfunction indicator light: Illuminated
|
| POSSIBLE CAUSE |
- Torque sensor malfunction
- EPS CM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |