LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Glass/Windows/Mirrors) >> Auto-Dimming Mirror Removal/Installation >> With Smart City Brake Support (SCBS)

With Smart City Brake Support (SCBS)

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the cover. (See RAIN SENSOR REMOVAL/INSTALLATION .)
  3. Disconnect the auto-dimming mirror connector.
    Fig 1: Identifying Auto-Dimming Mirror Connector
    G10938492Courtesy of MAZDA MOTORS CORP.
  4. Remove the screw A.
    Fig 2: Identifying Auto-Dimming Mirror Screw
    G10938493Courtesy of MAZDA MOTORS CORP.
  5. Remove the auto-dimming mirror in the direction of arrow (1) shown in the figure.
    Fig 3: Removing Auto-Dimming Mirror
    G10938494Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.