DTC U3000-54: Radar Performance Malfunction: Notes
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
| Description |
Radar performance malfunction |
| Detection condition |
- Blind spot monitoring (BSM) control module detected malfunction in misalignment.
|
| Fail-safe |
- Blind spot monitoring (BSM) system is stopped.
|
| Possible cause |
- Rear bumper soiling or foreign material (reflective object) is adhered.
- Dirt or foreign material (reflective object) on blind spot monitoring (BSM) control module.
- Blind spot monitoring (BSM) radar test was not performed.
- Deviation of blind spot monitoring (BSM) radar sensor axis
- Blind spot monitoring (BSM) control module malfunction
|
| System wiring diagram |
Not applicable |