LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Wheel Hubs - Rear) >> Wheel Hub Component Removal/Installation (2WD) >> Hub Support Bushing (Front) Installation Note

Hub Support Bushing (Front) Installation Note

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the projection of a hub support bushing with the marks placed during removal.
    Fig 1: Identifying Marks On Hub Support Bushing (Front)
    G10936587Courtesy of MAZDA MOTORS CORP.
  2. Install a new hub support bushing (front) using the SSTs. 
    Fig 2: Installing Hub Support Bushing (Front)
    G10936588Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals