Remaining Amount of Unbalance Confirmation

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

After installing the outer and inner balance weights, operate the wheel balancer again.
Confirm that the remaining unbalance does not exceed the following on either side.

If the remaining unbalance exceeds the specifications, adjust the wheel balance again.

WHEEL BALANCE SPECIFICATIONS

	Outer (Adhesive-type)	Inner (Knock-type)
17 inch wheel	13 g {0.46 oz}	8 g {0.28 oz}
19 inch wheel	12 g {0.42 oz}	7 g {0.25 oz}