LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Mechanical System) >> Engine Mount Disassembly/Assembly >> No. 1 Engine Mount (2WD) >> No. 1 engine mount rubber removal note (2WD)

No. 1 engine mount rubber removal note (2WD)

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the bolts shown in the figure.
    Fig 1: Removing No. 1 Engine Mount Bracket And Bolts
    G10916084Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • The bracket plate (No. 1) can move slightly by loosening the bolts shown in the figure and the No. 1 engine mount rubber can be easily removed.
  2. Remove the No. 1 engine mount rubber.
scientia non olet · About LEMON Manuals