LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Mechanical System) >> Electric Variable Valve Timing Actuator, Hydraulic Variable Valve Timing Actuator Removal/Installation >> Hydraulic Variable Valve Timing Actuator Removal Note

Hydraulic Variable Valve Timing Actuator Removal Note

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lock the exhaust camshaft against rotation by holding the exhaust camshaft with a vise and securing the cast hexagon with a wrench.
    Fig 1: Holding Exhaust Camshaft With Vise
    G10915931Courtesy of MAZDA MOTORS CORP.
  2. Loosen the hydraulic variable valve timing actuator installation bolt and remove the actuator.
scientia non olet · About LEMON Manuals