LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Electric Power Steering System (Service Information)) >> Steering Gear And Linkage Disassembly >> Tie-rod End Disassembly Note

Tie-rod End Disassembly Note

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place alignment marks as shown in the figure for proper installation.
    Fig 1: Identifying Alignment Marks On Tie-Rod End
    G10937426Courtesy of MAZDA MOTORS CORP.
  2. Remove the tie-rod end.
scientia non olet · About LEMON Manuals