LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Clutch (Service Information)) >> Clutch Pedal Inspection >> Pedal Height Inspection

Pedal Height Inspection

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform "PEDAL INSPECTION PREPARATION ". (See PEDAL INSPECTION PREPARATION .)
  2. Measure the pedal height with the clutch pedal released as shown in the figure.
    Fig 1: Measuring Pedal Height With Released Clutch Pedal
    G10936977Courtesy of MAZDA MOTORS CORP.

    Pedal height (reference value) 

    • 150 mm {5.91 in} (U.S.A. and CANADA)
    • 152 mm {5.98 in} (Except U.S.A. and CANADA)
    • If it is not the specification, replace the clutch pedal. (See CLUTCH PEDAL REMOVAL/INSTALLATION .)