DTC P081D-2F: Neutral Switch Signal Mismatch: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

System malfunction location	Neutral switch signal mismatch
Detection condition	With the ignition switched ON (engine off or on), the start unit detects that the vehicle speed changes from 0 km/h {0 mph} to 10 km/h {6.2 mph} for a continuous 5 or more times even though the neutral signal from the PCM is being received.
Fail-safe	Perform the control with neutral switch signal turned off.
Possible cause	DTCs are stored in the PCM. Neutral switch malfunction PCM malfunction Start stop unit malfunction
System wiring diagram	-