LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (On-Board Diagnostic - Start Stop Unit) >> Clearing DTC [Start Stop Unit] >> DTC Memory Clearing Procedure

DTC Memory Clearing Procedure

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Self Test".
    2. Select "All DTCs".
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Switch the ignition to off.
  6. Switch the ignition ON (engine off or on) and wait for 5 s or more. 
  7. Perform DTC inspection. (See DTC INSPECTION [START STOP UNIT] .)
  8. Verify that no DTCs are displayed.
scientia non olet · About LEMON Manuals