Disc Plate Thickness Inspection
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Excessive runout may result if the disc plate is removed from the vehicle then machined. Machine the disc plate while installed on the vehicle.
- Measure the thickness of the disc plate.
- If the thickness is not within the specification, replace the disc plate.
Minimum front disc plate thickness
- 26.0 mm {1.02 in}
Minimum front disc plate thickness after machining using a brake lathe on-vehicle
- 26.8 mm {1.06 in}
- If the thickness is not within the specification, replace the disc plate.