Pedal Play Inspection
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Pump the pedal several times to release the vacuum in the power brake unit.
- Gently depress the pedal by hand and measure the pedal play.
- If not within the specification, inspect the wear of the clevis pin. Replace it if there is any malfunction.
Brake pedal play
- 3-5 mm {0.12-0.19 in}
NOTE:- If there is no malfunction in the clevis pin, there is a possibility that the power brake unit has some malfunction. Verify that there are no malfunctions, and replace it if necessary.
- If not within the specification, inspect the wear of the clevis pin. Replace it if there is any malfunction.