LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Drive Selection System) >> Drive Selection Switch Removal/Installation >> Without Electric Parking Brake

Without Electric Parking Brake

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Remove the upper panel.(See UPPER PANEL REMOVAL .) (See UPPER PANEL INSTALLATION .)
  3. Remove the selector lever knob. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
  4. Remove the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION .)
  5. Remove in the order indicated in the table
  6. Install in the reverse order of removal.
Fig 1: Removing/Installing Drive Selection Switch Parts
G11450709Courtesy of MAZDA MOTORS CORP.