LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (On-Board Diagnostic - Audio Amplifier) >> DTC U3000-49; Audio Amplifier Internal Malfunction >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE

Step Inspection Action
1 VERIFY IF MALFUNCTIONING LOCATION IS AUDIO AMPLIFIER DEPENDING ON REPEATABILITY
  • Clear the DTC from the audio amplifier memory.
  • Retrieve the audio amplifier DTCs using the M-MDS. (See DTC INSPECTION [AUDIO AMPLIFIER] .)
  • Is the same DTC displayed?
Yes Replace the audio amplifier, then go to the next step.
(See AUDIO AMPLIFIER REMOVAL/INSTALLATION .)
No Go to the next step.
2 VERIFY IF OTHER DTCs DISPLAYED
  • Are any other DTCs displayed?
Yes Repair the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [AUDIO AMPLIFIER] .)
No DTC troubleshooting completed.