DTC U2300-54; U2300-55; U2300-56; U2300-64; Configuration Error: Notes
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION & POSSIBLE CAUSE
| Description |
U2300:54
- Configuration error (data not received)
U2300:55
- Configuration error (not configured)
U2300:56
- Configuration error (ineffective/non-interchangeable data read)
U2300:64
- Configuration error (error value read)
|
| Detection condition |
- Audio amplifier detects configuration data not record or data error.
|
| Fail-safe |
Not applicable |
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the audio amplifier to the audio amplifier, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
- Instrument cluster configuration is not completed.
- Module configuration procedure was not completed properly
- Correct data cannot be received from instrument cluster
- Instrument cluster malfunction
- Audio amplifier malfunction
|
| System wiring diagram |
Not applicable |