LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Rear Suspension System) >> Rear Shock Absorber Removal/Installation >> Suspension Link Installation Note

Suspension Link Installation Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. When installing the joint section with a rubber bushing, perform the following procedures.
    1. Temporarily tighten the stud bolt and nut with the vehicle lifted up.
    2. Lower the vehicle to the ground and tighten the stud bolt and nut to the specified torque.
scientia non olet · About LEMON Manuals