LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Rear Suspension System) >> Rear CROSSMEMBER Removal/Installation >> Suspension Links Installation Note

Suspension Links Installation Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. When installing the joint sections with rubber bushings, perform the following procedures.
    1. Temporarily tighten the bolts and nuts with the vehicle lifted up.
    2. Lower the vehicle to the ground and tighten the bolts and nuts to the specified torque.
scientia non olet · About LEMON Manuals