Windshield Wiper Blade

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Pull the windshield wiper blade tab up in the direction of the arrow shown in the figure.

Fig 1: Pulling Windshield Wiper Blade Tab
Courtesy of MAZDA MOTORS CORP.
Tilt the windshield wiper blade in the direction of the arrow (1) shown in the figure, press it in the direction of the arrow (2) shown in the figure, and detach the windshield wiper arm from the windshield wiper blade.

Fig 2: Tilting Windshield Wiper Blade
Courtesy of MAZDA MOTORS CORP.
Remove the windshield wiper blade.

Fig 3: Windshield Wiper Blade And Arm
Courtesy of MAZDA MOTORS CORP.
CAUTION:
- If the windshield wiper arm end is placed directly on the windshield after removing the windshield wiper blade, it could scratch the windshield. If the windshield wiper arm end is to be placed on the windshield, place it on a rag to protect the windshield.
Fig 4: Windshield Wiper Arm And Rag
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.