Standard tire and wheel (Mexico)
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Specification |
| Wheel |
Size |
16 x 6 1/2J |
| Inset |
(mm {IN}) |
50 {2.0} |
| Pitch circle diameter |
(mm {IN}) |
114.3 {4.50} |
| Material |
Steel |
Aluminum alloy |
| Tire |
Size |
P205/60R16 91H |
Air pressure
(kPa {PSI}) |
Front |
250 {36} |
| Rear |
250 {36} |
| Remaining tread |
(mm {IN}) |
1.6 {0.063} min. |
| Wheel and tire |
Lug nut tightening torque |
(N.m {kgf.m, ft.lbf}) |
108-147 {12-14, 80-108} |
| Wheel and tire runout (mm {IN}) |
Radial direction |
1.5 {0.059} max. |
| Lateral direction |
2.5 {0.098} max. |
2.0 {0.079} max. |
| Wheel imbalance |
(g {OZ}) |
Knock-type : 9.0 {0.32} max. |
Adhesive-type : 14 {0.49} max.
Knock-type : 9 {0.32} max. |
| Item |
Specification |
| Wheel |
Size |
18 x 7J |
| Inset |
(mm {IN}) |
50 {2.0} |
| Pitch circle diameter |
(mm {IN}) |
114.3 {4.50} |
| Material |
Aluminum alloy |
| Tire |
Size |
215/45R18 89W |
| Air pressure (kPa {bar, psi}) |
Front |
Up to 3 persons |
240 {2.4, 35} |
| Full load |
280 {2.8, 41} |
| Rear |
Up to 3 persons |
230 {2.3, 33} |
| Full load |
300 {3.0, 44} |
| Remaining tread |
(mm {IN}) |
1.6 {0.063} min. |
| Wheel and tire |
Lug nut tightening torque |
(N.m {kgf.m, ft.lbf}) |
108-147 {12-14, 80-108} |
| Wheel and tire runout (mm {IN}) |
Radial direction |
1.5 {0.059} max. |
| Lateral direction |
2.0 {0.079} max. |
| Wheel imbalance |
(g {OZ}) |
Adhesive-type : 12 {0.42} max.
Knock-type : 8.0 {0.28} max. |