LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (On-Board Diagnostic - Connectivity Master Unit) >> Diagnostic Assist Function Connectivity Master Unit >> Diagnostic Assist Code Input Procedure >> Using commander switch

Using commander switch

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Input the diagnostic assist code by rotating the commander knob.
    Fig 1: Locating Audio Button, Home Button And Back Button
    G11467198Courtesy of MAZDA MOTORS CORP.
  2. Press the commander knob.
  3. Perform inspection according to diagnostic assist code list. (See DIAGNOSTIC ASSIST CODE LIST .)
    CAUTION:
    • If [- REJECTED] is displayed, the inspection cannot be performed because communication is not enabled between the related parts, or the conditions are not met even if communication is enabled.
scientia non olet · About LEMON Manuals