LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (On-Board Diagnostic - Connectivity Master Unit) >> Diagnostic Assist Function Connectivity Master Unit >> Activation Procedure >> Using center display

Using center display

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch the ignition to ACC or ON (engine off or on).
  2. Display the display setting screen in the center display.
    1. Select [Settings icon] on the center display.
    2. Select [Display tab] on the center display.
  3. Operate the center display in the following order.
    1. Touch and hold the right upper area of the screen (area A in figure) until a beep is heard (approx. 5 s or more).
    2. Touch and hold the left upper area of the screen (area B in figure) until a beep is heard (approx. 5 s or more).
    Fig 1: Center Display Screen
    G11275569Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals