LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (On-Board Diagnostic - Connectivity Master Unit) >> DTC U0001-88; U0100; U0101; U0104; U0121; U0131; U0140; U0151; U0155; U0182; U0214; U0235; U023A; Module Communication Errors >> Notes

DTC U0001-88; U0100; U0101; U0104; U0121; U0131; U0140; U0151; U0155; U0182; U0214; U0235; U023A; Module Communication Errors: Notes

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION & POSSIBLE CAUSE

Description
  • U0001:88
    • Module communication error (HS-CAN)
  • U0100:00
    • Communication error with PCM
  • U0101:00
    • Communication error with TCM
  • U0104:00
    • Communication error with radar unit
  • U0121:00
    • Communication error with DSC HU/CM
  • U0131:00
    • Communication error with EPS control module
  • U0140:00
    • Communication error with front body control module (FBCM)
  • U0151:00
    • Communication error with SAS control module
  • U0155:00
    • Communication error with instrument cluster
  • U0182:00
    • Communication error with AFS control module
  • U0214:00
    • Communication error with start stop unit
  • U0235:00
    • Communication error with forward sensing camera (FSC)
  • U023A:00
    • Communication error with forward sensing camera (FSC)
Detection condition
  • U0001:88
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot detect a CAN bus communication line (HS-CAN) signal for 1 s or more.
      • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) detects malfunction in the CAN bus communication line (HS-CAN) 10 times continuously.
  • U0100:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the PCM for 5 s or more.
  • U0101:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the TCM for 5 s or more.
  • U0104:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the radar unit for 5 s or more.
  • U0121:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the DSC HU/CM for 5 s or more.
  • U0131:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the EPS control module for 5 s or more.
  • U0140:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the front body control module (FBCM) for 5 s or more.
  • U0151:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the SAS control module for 5 s or more.
  • U0155:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the instrument cluster for 5 s or more.
  • U0182:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the AFS control module for 5 s or more.
  • U0214:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the start stop unit for 5 s or more.
  • U0235:00
    • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the forward sensing camera (FSC) for 5 s or more.
  • U023A:00
  • With the ignition switched ON (engine off or on), the connectivity master unit (CMU) cannot receive a CAN signal from the forward sensing camera (FSC) for 5 s or more.
Fail-safe function
  • U0001:88
    • Not applicable
  • U0100:00
    • Not applicable
  • U0101:00
    • Not applicable
  • U0104:00
    • Not applicable
  • U0121:00
    • Not applicable
  • U0131:00
    • Not applicable
  • U0140:00
    • Not applicable
  • U0151:00
    • Not applicable
  • U0155:00
    • Not applicable
  • U0182:00
    • Not applicable
  • U0214:00
    • Not applicable
  • U0235:00
    • Not applicable
  • U023A:00
    • Not applicable
Possible cause
  • Malfunction in CAN bus communication line
  • Malfunction in CAN communication line between the PCM and connectivity master unit (CMU)
  • Malfunction in CAN communication line between the TCM and connectivity master unit (CMU)
  • Malfunction in CAN communication line between the radar unit and connectivity master unit (CMU)
  • Malfunction in CAN communication line between the DSC HU/CM and connectivity master unit (CMU)
  • Malfunction in CAN communication line between the EPS control module and connectivity master unit (CMU)
  • Malfunction in CAN communication line between the front body control module (FBCM) and connectivity master unit (CMU)
  • Malfunction in CAN communication line between the SAS control module and connectivity master unit (CMU)
  • Malfunction in CAN communication line between the instrument cluster and connectivity master unit (CMU)
  • Malfunction in CAN communication line between the AFS control module and connectivity master unit (CMU)
  • Malfunction in CAN communication line between the start stop unit and connectivity master unit (CMU)
  • Malfunction in CAN communication line between the forward sensing camera (FSC) and connectivity master unit (CMU)
System wiring diagram Not applicable
scientia non olet · About LEMON Manuals