Automatic BLUETOOTH® Connection Not Possible [Entertainment System [With Center Display]]: Notes
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
AUTOMATIC BLUETOOTH® CONNECTION NOT POSSIBLE (ENTERTAINMENT SYSTEM - WITH CENTER DISPLAY) - DESCRIPTION & POSSIBLE CAUSES
| Description |
AUTOMATIC Bluetooth® CONNECTION NOT POSSIBLE |
Bluetooth ® pairing setting is possible, however, automatic Bluetooth ® connection is not possible
NOTE:
- The Bluetooth ® pairing procedure differs depending on the version of the Bluetooth ®-enabled device. Ask the customer in advance what the Bluetooth®-enabled device's version was when the Bluetooth ® pairing was performed.
- If the Bluetooth®-enabled device has an access limitation, the automatic Bluetooth® connection cannot be performed. Ask the customer in advance if the Bluetooth®-enabled device has an access limitation.
- A maximum of seven Bluetooth ®-enabled devices can be programmed to one vehicle.
|
| Possible Causes |
- Customer's Bluetooth ®-enabled device malfunction
- Bluetooth ® setting is off
- Radio wave transmission setting including Bluetooth ® radio wave is off
- Bluetooth ®-enabled device information has been changed (such as OS update), therefore, Bluetooth ®-enabled device information programmed to vehicle is incompatible
- Bluetooth ®-enabled device internal malfunction
- Connector poor contact or terminal damage
- Connectivity master unit (CMU) malfunction
|