DTC P0736; Gear Reverse Incorrect Ratio: Notes

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

DETECTION CONDITION & POSSIBLE CAUSE

DTC P0736:00	Gear reverse incorrect ratio
DETECTION CONDITION	Speed ratio is 0.75 to 1.2 for 2, 000 ms while vehicle is stopped in R position.
FAIL-SAFE FUNCTION	Inhibits learning control. Inhibits neutral idle control.
POSSIBLE CAUSE	ATF is less than specified value Clutch burnt Shift solenoid malfunction ATF leakage from clutch circuit Control valve body malfunction
SYSTEM WIRING DIAGRAM	Not applicable