Boot Band (Transaxle Side) Disassembly Note [ATX]

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

SKYACTIV-G 2.0

Using a flat chisel and hammer, lightly tap the lever of the boot band to disconnect the lock clip.

Fig 1: Tapping Lever Of Boot Band Using Flat Chisel And Hammer
Courtesy of MAZDA MOTORS CORP.
Remove the boot band using pliers.

Fig 2: Removing Boot Band Using Pliers

Courtesy of MAZDA MOTORS CORP.

SKYACTIV-G 2.5

Remove the boot band using end clamp pliers.

Fig 3: Removing Boot Band Using End Clamp Pliers (Small Diameter Side)

Courtesy of MAZDA MOTORS CORP.