LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Drive Axle Shaft) >> Front Drive Shaft (Tripod Joint) Disassembly/Assembly >> Bearing Assembly Note

Bearing Assembly Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the new bearing using the SST and the press.
Fig 1: Installing Bearing Using SST And Press
G11427154Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals