LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Drive Axle Shaft) >> Front Drive Shaft (Double Offset Joint) Disassembly/Assembly >> Bearing Assembly Note

Bearing Assembly Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble a new bearing using the SST and a press.
Fig 1: Installing Bearing Using SST
G11450432Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals