PID/Data Monitor Table Forward Sensing Camera (FSC)

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

PID/DATA MONITOR (FORWARD SENSING CAMERA) DESCRIPTION

PID	Unit/Operation	Data contents	Module control terminal
HBC_H/L_CS	Hi_Request/Low_Request/Invalid	Hi Request: HI beam switch signal received. Low Request: LO beam switch signal received. Error in HI/LO beam switch request signal.	M, N
INH_LAS	Off/On	Off: Lane-keep assist system control is not inhibited. On: Lane-keep assist system control is inhibited.	M, N
INH_SCBS	Off/On	Off: Smart city brake support (SCBS) control is not inhibited. On: Smart city brake support (SCBS) control is inhibited.	M, N
LDWS_SW	Off/On	Off: LDWS switch is off. On: LDWS switch is on.	M, N
VPWR	V	Displays forward sensing camera (FSC) power supply voltage	B
VSPD	KPH, MPH	Displays vehicle speed	M, N