LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (On-Board Diagnostic - Forward Sensing Camera) >> DTC B115E-76; Forward Sensing Camera (FSC) Axis Deviation >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE

Step Inspection Action
1 PERFORM FORWARD SENSING CAMERA (FSC) AIMING Yes Perform the forward sensing camera (FSC) aiming again, then go to the next step.
(See FORWARD SENSING CAMERA (FSC) AIMING .)
No Go to Step 3.
2 VERIFY THAT REPAIRS HAVE BEEN COMPLETED Yes Replace the forward sensing camera (FSC), then go to the next step.
(See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)
No Go to the next step.
3 VERIFY IF OTHER DTCs DISPLAYED
  • Are any other DTCs displayed?
Yes Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [FORWARD SENSING CAMERA (FSC)] .)
No DTC troubleshooting completed.