Using M-MDS
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to the DLC-2.
- After vehicle identification, select the following from the M-MDS initialization screen.
- "Module programming"
- "Programmable Parameters"
- Select menu in the "IC".
- Select an item name, and than select option.
| M-MDS display | Function | Initial setting | Setting contents | Control unit |
|---|---|---|---|---|
| Smart Brake Support Volume. | The volume of the smart brake support (SBS) warning alarm can be changed. | High | OFF/Low/High | Instrument cluster |
| SCBS Sensitivity | The distance at which the collision warning activates can be changed. | Med | Long/Med/Short | Instrument cluster |