LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (I-ACTIVSENSE) >> i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE >> Lane-keep Assist System/Lane Departure Warning System (LDWS) >> Using M-MDS (FSC)

Using M-MDS (FSC)

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After vehicle identification, select the following from the M-MDS initialization screen.
    1. "Module programming"
    2. "Programmable Parameters"
  3. Select menu in the "FSC".
  4. Select an item name, and than select option.
M-MDS display Function Initial setting Setting contents Control unit
LDWS Timing. The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed. Late Adaptive/Early/Medium/Late Forward sensing camera (FSC)
LDWS Warning. The warning operation sensitivity of the lane departure warning system (LDWS) can be changed. Often Often/Medium/Rare Forward sensing camera (FSC) LDWS Alart The operation of lane departure warning system (LDWS) can be turned off. ON OFF/ON Forward sensing camera (FSC)
LDWS LKA MODE The function of lane departure warning system (LDWS)/lane-keep assist system can be switched. LKA OFF/LKA/LDWS Forward sensing camera (FSC)
LKA Sensitivity The operation timing of lane-keep assist system warning can be changed. AUTO AUTO/Near/Med/Far Forward sensing camera (FSC)
LKA Cancel Sensitivity The warning operation sensitivity of lane-keep assist system warning can be changed. Med HI/Med HI/Med/LO/LO Forward sensing camera (FSC)
scientia non olet · About LEMON Manuals