LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (I-ACTIVSENSE) >> i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE >> Blind Spot Monitoring (BSM) System >> Using M-MDS

Using M-MDS

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After vehicle identification, select the following from the M-MDS initialization screen.
    1. "Module programming"
    2. "Programmable Parameters"
  3. Select menu in the "IC".
  4. Select an item name, and than select option.
M-MDS display Function Initial setting Setting contents Control unit
BSM Volume. The volume of the blind spot monitoring (BSM) warning alarm can be changed. High OFF/Low/High Instrument cluster
BSM OFF ON The operation of blind spot monitoring (BSM) system can be turned off. ON OFF/ON Instrument cluster
scientia non olet · About LEMON Manuals