LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (On-Board Diagnostic - Dynamic Stability Control (DSC)) >> On-Board Diagnosis Dynamic Stability Control (DSC) >> Reading DTCs Procedure >> CMDTC self test

CMDTC self test

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "All CMDTCs".
  3. Verify the DTC according to the directions on the screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
  4. After completion of repairs, clear all DTCs stored in the DSC. (See CLEARING DTCS PROCEDURE .)
scientia non olet · About LEMON Manuals